Apollo MRH Series, User Manual And Instruction Manual, Page: 72 / 74

Operating Manual
64
Troubleshooting
Problem Possible Solution
No Power
 Check power cord connections.
 Confirm that there is power at the outlet.
No Live Video
 Check camera video cable and connections.

Check monitor video cable and connections.
 Confirm that the camera has power.

Check camera lens settings.
DVR has stopped recording
If hard disk drive is full, you will either need to delete video or set the DVR to the
Overwrite Mode.
The icon displays,
however, the DVR is not
recording. When the DVR is in the Pre-Event recording mode, the yellow and display
when there is no event, and the DVR is not recording. The red and display
when any event occurs and the DVR starts recording.
While upgrading the system,
the DVR keeps rebooting and
the upgrade fails. If the current system version is higher than the upgrade package file version, you
should reset the DVR first using the Factory Reset. When using the Factory Reset,
you will lose any settings you have saved.
System Log Notices
Boot Up Setup Export Cancel Clip-Copy Fail
Shutdown Schedule On Clip-Copy User:
Restart Schedule Off Clip-Copy From:
Upgrade Panic On Clip-Copy To:
Upgrade Fail Panic Off Clip-Copy Duration of Video:
Power Failure No Storage Found Clip-Copy Camera:
Time Change Storage Wrong Format Callback Fail
Time Zone Change Storage Formatted ACC: On
Time Sync Clear All Data ACC: Off
Time Sync Fail Clear Disk Key: On
Disk Bad Format Disk Key: Off
Login Disk Full Heater On: Local
Logout Disk Config Change Heater On: Boot Up
Setup Begin Disk ‘No.’ : ‘serial number’ Shutdown: Low Voltage
Setup End Disk ‘No.’ : Removed Shutdown: High Voltage
Remote Setup Change Auto Deletion Shutdown: Low Temperature
Remote Setup Fail Search Begin Shutdown: ACC
Setup Imported Search End
Recover from Power Failure: Low
Voltage
Setup Import Failure Clip-Copy Begin
Recover from Power Failure: High
Voltage
Setup Exported Clip-Copy End
Setup Export Failure Clip-Copy Cancel