Apollo MRH Series, User Manual And Instruction Manual, Page: 29 / 74

Mobile Digital Video Recorder
21
Selecting
DHCP
from the Type and selecting
Save
button
reads the current IP address of the DVR configured by DHCP
(Dynamic Host Configuration Protocol) network.
Select
Auto
(Default) to toggle between On and Off. When
it is On, the DVR will obtain the IP address of the DNS server
automatically.
NOTE: Selecting Auto will only be enabled when the DVR
is configured for DHCP or an ADSL network.
Selecting
ADSL (with PPPoE)
allows you to set up the ADSL
network.
Select the box beside
ID
, and a virtual keyboard appears
allowing you to enter the ID for ADSL connection.
Select the box beside
Password
, and
a
virtual keyboard
appears allowing you to enter the password for ADSL
connection.
NOTE: Entering the ID and Password and selecting OK reads the current IP address of the DVR configured by
the ADSL network.
If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might change whenever
the unit is turned on.
PATH: Network menu > Network > DVRNS tab
Select
Use DVR Name Service
to toggle between On and
Off.
NOTE: The DVRNS (DVR Name Service) allows the DVR to
use Dynamic IP addresses for remote connection.
When this feature is On, you can access your DVR
remotely using the DVR name instead of its IP
address. For the DVRNS feature, the DVR should
be registered on the DVRNS server.
Select the box beside
DVRNS Server
, and a virtual keyboard
appears allowing you to enter the IP address or domain name
of the DVRNS server.
Figure 21 — DVRNS setup screen.
NOTE: You will need to get the IP Address or domain name of the DVRNS Server from your network administrator.
You can use the domain name instead of IP address if you already set up the DNS Server when setting
up the LAN.
Select the box beside
Port
and set the port number of the DVRNS server by using the Up and Down arrows to increase
or decrease the numbers.
Select
Use NAT
to toggle between On and Off.
NOTE: When using the NAT (Network Address Translation) device, refer to the NAT manufacturer’s instructions
for the proper network settings.