Apollo MRH Series, User Manual And Instruction Manual, Page: 48 / 74

Operating Manual
40
Select the
Case Sensitive
box to toggle between On and Off. Refer to the device manufacturer’s documentation to
determine if the text strings are Case Sensitive. If the device distinguishes between upper and lower case letters, make
certain the
Case Sensitive
box is turned On.
Select the box beside
Time Out
, and set the length of time to wait for the new text string. The DVR will consider a
transaction complete if no new text strings are entered between the last text input and the dwell time out. You can adjust
the Time Out dwell from 5 seconds to 15 minutes.
PATH: Event menu > Text-In > Actions tab
Figure 54 — Text-In Actions screen.
The DVR can be set to react to text input. Text input can be
associated with cameras, trigger an Alarm-Out connector,
notify a number of different devices, and/or move PTZ cameras
to preset positions.
Select the box beside
Record
, and a list of cameras appears.
You can associate as many cameras with the Text Input as
you wish. If the DVR detects text input, it starts recording
video from all the associated cameras.
NOTE: For the Record action, the camera you select should
be set to the Event or Time & Event recording mode
in the Record Schedule setup screen.
Select the box beside
Alarm-Out
, and a list of Alarm Outputs appears. You can associate as many Alarm-Outs with
the Text Input as you wish. When the DVR detects text input, it triggers output signals on all the associated Alarm-Out
connectors.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Select the box beside
Notify
. You can toggle the entire list On and Off by selecting
Notification
. You can toggle the
individual items On and Off by selecting that item. Select
OK
to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and
the DVR should be registered in the RAS (Remote Administration System).
Select the desired box under the
PTZ
heading, and a list of PTZ presets appear. Select the preset positions for each PTZ
camera, where you want PTZ cameras to move to when the DVR detects text input.
System Event
PATH: Event menu > System Event > Health Check tab
Figure 55 — Health Check screen
The DVR can be configured to run self-diagnostics and report
the results.
Selecting the box beside
System
allows you to select the
interval that you want the DVR to run self-diagnostics on
the system. You can select from
1 hr.
to
30 days
or
Never
.