Apollo MRH Series, User Manual And Instruction Manual, Page: 24 / 74

Operating Manual
16
PATH: System menu > Storage > Status tab
Figure 13 — Storage Status screen.
The
Type
column displays the type of storage device.
The
Disk Bad
column displays the percentage of bad sectors.
Not formatted
indicates the device is not formatted.
The
Temperature
column displays the temperature of the
storage device.
The
S.M.A.R.T.
column displays
“Good”
,
“Bad”
or
“N/A”
,
depending on storage conditions.

Good –
The storage condition is normal.

Bad –
Data cannot be written on or read from the storage device.

N/A –
Storage conditions are normal, however, the S.M.A.R.T.
monitoring is not working or supported.
NOTE: When the storage condition is “Bad”, the Event Status – Storage screen displays and you can check
the storage condition for details. Once the “Bad” message displays, replacing the hard disk drive is
recommended, usually within 24 hours.
Temperature and S.M.A.R.T. information will be available only for the internal hard disk drive supporting
the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.
PATH: System menu > Storage > Setup tab
Figure 14 — Storage Setup screen.
Selecting
Auto Format
toggles between On and Off. When
set to On, the internal hard disk drive will be formatted
automatically when the system boots if the internal hard disk
drive is not formatted or used for another DVR (except of the
same model).
User
PATH: System menu > User
The User screen displays the authorized groups and users, and you can add and delete groups and users. When adding
a group, you can assign authority levels to the group.