Apollo MRH Series, User Manual And Instruction Manual, Page: 25 / 74

Mobile Digital Video Recorder
17
Figure 15 — User setup screen.
The
+/-
column is used to collapse and expand user groups.
If there is a + or – in this column, it indicates the item is a
Group Name. If there is a – in front of the Group Name, it
indicates that the group has been “expanded” and all of the
User Names within that group are displayed below the Group
Name. If there is a + in front of the Group Name, it indicates
that the group has been “collapsed” and all of the User Names
within that group are hidden. To collapse or expand a group,
select the
+/-
column in front of the desired group.
Selecting a Group Name allows you to change the authority
levels assigned to the group.
CAUTION: Write down the new password and save it in a secure place. If the password is forgotten,
the unit must be reset using the Factory Reset Button and all data settings will be lost.
Selecting a User Name allows you to add or change the password assigned to that user. You can also change the group
to which the user is assigned.
The column can be used to delete a User Name or an entire Group. If the is grayed out, that Group or User cannot
be deleted. Select the , and you will be asked to confirm that you want to delete the User or Group. To delete the
User currently logged into the DVR on a local system or a PC running RAS, log the user out of the system first and
then delete the user.
To add a Group, select the
+ Group…
box. A virtual keyboard appears allowing you to enter the Group name. You
can use up to 15 characters including spaces in the group name. Enter the name and assign authority levels to the group.
Selecting the
Authority
box will toggle between all authority levels being turned
On and Off. Selecting the individual authority level boxes will toggle between
that authority level being turned On and Off. The authority levels that can be
turned On and Off are:

Shutdown –
The user can shut the system down on a local system.

Upgrade –
The user can upgrade the software on a local system or a PC running RAS.

Color Control –
The user can control brightness, contrast, hue and saturation for cameras
on a local system or a PC running RAS.

System Check –
The user can view the remote system status or check the remote system
status as a batch process on a PC running RAS.

PTZ Control –
The user can control the PTZ camera on a local system or a PC running RAS.

Alarm-Out Control –
The user can reset the DVR’s outputs during an alarm by selecting (Alarm Reset) in the Live Monitoring
or Search menu on a local system or alarm-out control button on a PC running RAS.

Covert Camera View –
The user can view video from cameras set as Covert while in the Live Monitoring or Search mode on
a local system or a PC running RAS.

Search –
The user can access the Search mode on a local system or a PC running RAS.

Clip-Copy –
The user can copy video clips on a local system or a PC running RAS.

Setup –
The user without Setup authority cannot establish any system settings excluding system shutdown and logout on a local
system or a PC running RAS.

System Time Change –
The user can change the system date and time on a local system or a PC running RAS.

Data Clear –
The user can clear all video data or format disks on a local system or a PC running RAS.

PTZ Setup –
The user can establish all PTZ settings on a local system or a PC running RAS.

Alarm-Out Setup –
The user can establish all Alarm-Out settings on a local system or a PC running RAS.

Covert Camera Setup –
The user can establish all Covert Camera settings on a local system or a PC running RAS.

Record Setup –
The user can establish all Record settings on a local system or a PC running RAS.
To add a User, select the
+ User…
box. A virtual keyboard appears allowing you to
enter the User Name. Enter the name and assign the User to a Group and password.
The password can be up to 8 digits. You will be asked to confirm the password.