Apollo MRH Series, User Manual And Instruction Manual, Page: 32 / 74

Operating Manual
24
Select the box beside
Port
and enter the SMTP Server port number obtained from your system administrator by using
the Up and Down arrows. The default port number is 25.
Select
Use SSL/TLS
to toggle between On and Off. When it is On, the DVR can send an email via an SMTP server
requiring SSL (Secure Sockets Layer) authentication.
Select the box beside
Authentication
, and an Authentication screen appears. Select
Use
to toggle between On and Off. Select the box beside
User
/
Password
, and a
virtual keyboard appears allowing you to enter the user ID and password.
Select the box beside S
ender
and enter the sender’s e-mail address. Use the virtual keyboard to enter the e-mail address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Select the
Test
box to test emailing with the current settings you made.
PATH: Network menu > Notification > Schedule tab
You can add and edit notification schedules on this screen.
Select the
+
to add a schedule. Selecting the boxes under the
Column
heading allows you to edit the information in those
boxes.
The
Day
box allows you to select the days that the notification
schedule will be active. The choices are: Sun, Mon, Tue, Wed,
Thu, Fri, Sat, M~F, Hol and All.
The
Range
box allows you to set the time that the notification
schedule will be active in 15-minute increments from 00:00
to 24:00.
Figure 25 — Notification Schedule setup screen.
Select the desired box under the
Notify
heading, and the
Schedule Notify
menu appears.
You can toggle the entire list On and Off by selecting
Notification
. You can toggle the
individual items On and Off by selecting that item. Select
OK
to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the
Notification setup screen and the DVR should be registered in the RAS
(Remote Administration System).
NOTE: The Notify action for system events you made in the System Event setup
screen on the Event menu will not be affected by your Notification Schedule
settings.
Select the box beside
Summary Email Interval
and select the interval that you want the DVR to send a summary email.
The DVR will send an email containing a summary of events detected during the preset interval.