72
• Check the chain sliding guard for wear.
If the lower edge of the chain pins is in line with or
below the chain sliding guard:
• Change the chain sliding guard.
• Check that the chain sliding guard is firmly seated.
If the chain sliding guard is loose:
• Tighten the screws on the chain sliding guard.
Guideline
Upper Screw, chain sliding guard M8 15 Nm (11,1 lbf ft)
Bottom screw, chain sliding guard M8 15 Nm (11,1 lbf ft)
Check the chain guide with a slide gauge for dimension.
Minimum thickness of the chain guide 6 mm (0.24 in)
If the measured value is less than the specification:
• Change the chain guide.
Check that the chain guide is firmly seated.
If the chain guide is loose:
Tighten the screws on the chain guide.
Guideline
Remaining screws, chassis M6 6 Nm (4,4 lbf ft)
Summary of Contents for APOLLO 150
