Apollo APOLLO 150 User Manual Download

Page: 47 / 92

COMPRESSION DAMPING OF FORK:

Hydraulic compression damping determines the reaction when the fork is com-

pressed. The degree of compression can be adjusted with adjusting screws at

the bottom of the fork legs.

Turn the knob 1 clockwise to increase damping, turn it counterclockwise to re-

duce damping during compression.

STANDARD ADJUSTMENT:

• Turn adjusting screw clockwise as far as it will go

• Turn it back by as many clicks as are specified for the relevant type of fork

REBOUND DAMPING OF FORK:

Hydraulic rebound damping determines the reaction when the fork is rebound.

• By turning the adjusting screw 2 , the degree of damping of the rebound can be

adjusted.

• Turn the knob clockwise to increase damping, turn it counterclockwise to re-

duce damping during rebounding.

STANDARD ADJUSTMENT:

• Turn adjusting screw clockwise as far as it will go

• Turn it back by as many clicks as are specified for the relevant type of fork

After every 5 hours of use for competitive racing, slacken the breather plugs 1 a few turns in order to

relieve excess pressure from the inside of the fork. To do this, place the motorcycle on a stand with the

front wheel lifted off the ground.

8.5 VOLT VTRAAK FRONT FORK (from Freeride S model)

8.6 Breather plug front fork

Excessive pressure in the interior of the fork can cause leaks in the fork. If your fork is lea-

king, it is recommended to open the breather plugs before having the seals replaced.

Summary of Contents for APOLLO 150




























































































Search results

Summary of Contents for APOLLO 150

Reviews:

Related manuals for APOLLO 150

Brands by name

Popular brands

Apollo APOLLO 150, User Manual

Search results

Summary of Contents for APOLLO 150

Reviews:

Related manuals for APOLLO 150

Brands by name

Popular brands