Apollo APOLLO 150, User Manual

Page: 71 / 92

71
Preparatory work
• Raise the motorcycle with a lift stand.
• Check the chain tension. ( .70)
Main work
• Loosen nut 1.
• Loosen nuts 2.
• Adjust the chain tension by turning adjusting screws 3 left
and right.
Guideline
Chain tension 15...25mm (0,6..0,9 in)
• Tighten nuts 2.
• Make sure that chain adjusters 4 are fitted correctly on ad-
justing screws 3.
• Tighten nut 1.
Guideline
Nut, rear wheel spindle M14 120 Nm (88,5 lbf ft)
Preparatory work
• Raise the motorcycle with a lift stand.
Main work
• Shift the transmission to idle.
• Check the rear sprocket and engine sprocket for wear.
If the rear sprocket or engine sprocket is worn:
• Change the drivetrain kit.
• Check the chain for wear.
If the chain is worn:
• Change the drivetrain kit.
New chains wear out faster on old, worn sprockets.
11.26 Checking the chain, rear sprocket, engine sprocket, and chain guide
The engine sprocket, rear sprocket, and chain should always be replaced together.
When a new chain is mounted, the rear sprocket and engine sprocket should also be changed.
1
2
2
3
A
3
3
A
4