Apollo APOLLO 150 User Manual Download

Page: 59 / 92

• Position the fork protector on the right fork leg.

• Mount and tighten screws 3.

Guideline

Remaining screws, chassis M6 5 Nm (3,6 lbf)

• Position the fork protector on the left fork leg.

• Mount and tighten screws 2.

Guideline

Remaining screws, chassis M6 5 Nm (3,6 lbf)

• Position the brake line and clamp.

• Mount and tighten screws 3.

11.3 Installing the fork protector

11.4 Removing the fork legs

Preparatory work

• Raise the motorcycle with a lift stand.

• Remove the front wheel. ( .54)

Main work

• Remove screws 1 and take off the clamp.

• Remove screws 2 and take off the brake caliper.

• Allow the brake caliper and brake line to hang loosely to the

side.

Elite

• Loosen screws 3. Take out the left fork leg.

• Loosen screws 4. Take out the right fork leg.

Summary of Contents for APOLLO 150




























































































Search results

Summary of Contents for APOLLO 150

Reviews:

Related manuals for APOLLO 150

Brands by name

Popular brands

Apollo APOLLO 150, User Manual

Search results

Summary of Contents for APOLLO 150

Reviews:

Related manuals for APOLLO 150

Brands by name

Popular brands