22
2
Bolt
M18×120
8
3
Drive-on ramp
405-11-00
2
4
Ramp shaft
2
5
Split pin
4×40
4
6
Sliding block
401-00-11
8
7
Hexagon socket
M8×15
16
8
Bolt
M12×40
4
7.15
CHECK WITH LOAD
WARNING: please follow carefully the instructions in the coming paragraph for
avoiding damages on the lift
Carried out two or three complete cycles of lowering with the vehicle loaded and lifting and:
Repeat the checks provided for by 7.13.
Check no strange noise during lifting and lowering.
If the runways weren’t leveled, readjust.
7.16 INSTALLATION OF JACKING BEAM
This jacking beam is designed to be equipped with a 4 post lift. The maximum capacity is 2000kg.
The jacking beam should be equipped between the two platform with wheels on the sliding rail, as
showed by fig 16.
