32
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
•
CSA Certificate of Compliance
DQD 507 Rev. 2016-02-18
Page 1
Certificate of Compliance
Certificate:
70118144
Master Contract:
237484
Project:
70191110
Date Issued:
2018-08-14
Issued to:
Automation Products Group Inc
1025 West 1700 North
Logan, Utah 84321
USA
Attention: Scott Hutchins
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
Issued by:
Ronald (Ron) Bell
Ronald (Ron) Bell
PRODUCTS
CLASS - C225804 - PROCESS CONTROL EQUIPMENT
- Intrinsically Safe, Entity-- For Hazardous
Locations
CLASS - C225884 - PROCESS CONTROL EQUIPMENT
- Intrinsically Safe, Entity-- For Hazardous
Locations - Certified to US Standards
Class I, Division 1, Groups C, D, T4
Class I, Zone 0, AEx ia, IIB, T4, Ga
Ex ia IIB, T4, Ga
Model MNU-IS abcd-efg-hi-xxxx-xxxx Ultrasonic Sensors, rated 8-28 VDC, 25 mA Typ @ 24Vdc; Tamb = -
30°C to +60°C.
Intrinsically safe when connected per drawing 9005002
The following configurator options are relevant to the IS certification:
Configurator code “a” represents the range of measurement of the equipment, which corresponds technically to the piezo-
transducer that is used.
Configurator code
Option
Description
a – Range
2
1-25 ft. (30mm, 69Khz piezo-transducer)
3
1.5-40 ft. (51mm, 43Khz piezo-transducer)
