68
and Manual. Time-based reset mode follows the relay reset time set in the
General Event
Settings
. Sensor synchronized reset mode follows the status of the sensor. If the sensor turns
off, then so does the relay. Manual reset mode means the relay will not reset back to normal
unless manually reset.
3. Normal State – Indicates what the normal state of the sensor is set to. If the sensor is normally
set to ON, then click on the normal state to set it on.
4. Map PTZ – Indicates if the sensor will be mapped to a PTZ action when it is triggered. If this is
unchecked, then the PTZ On, PTZ Off and Dwell Time options are also disabled.
5. PTZ On – Displays a drop down list menu of available PTZ presets and group runs that can be
called when the sensor is triggered.
6. PTZ Off – Displays a drop down list menu of available PTZ presets and group runs that can be
called when the Dwell Time length has been reached.
7. Dwell Time – Indicates the length in seconds on how long the PTZ will remain in the PTZ On
position before going to the PTZ Off position.
8. Mapping – Indicates the mapping that have been set. For sensor-camera mappings, an "O"
signifies that there is a mapping there. For sensor-relay mappings, a "T" signifies a mapping
that has a time-based relay reset mode. An "S" signifies a mapping that has a
sensor-synchronized relay reset mode. An "X" signifies a mapping that has a manual relay
reset mode.
9. Restore Defaults – Restores the default settings.
10. Apply – Saves the settings.
