46
EN
ACTUAL MACHINE WEIGHT AND MEASUREMENTS
MASS
Width
Depth
Height
kg
mm
mm
mm
107/252
650/870
770/990
117/1530
INSTRUCTIONS FOR TRANSPORT AND UNLOADING
The machine can be loaded onto and unloaded from the transportation vehicle via:
Crane, see figure “A”;
Forklift, see figure “B”.
The machine is to be transported taking all precautions so as not to damage it.
In particular, the machine must not be stacked on top of or under other materials, either during transport
or storage.
During transport, the machine must be arranged so as not to be bumped by other materials loaded on
the same vehicle.
Before unloading from the transportation vehicle, you must make sure the packaging is intact and that
there is no risk of overturning.
When unloading, be sure to set the machine down carefully on the ground to avoid damaging impacts.
WARNING! After having positioned the machine, wait about 2 hours before powering it to
allow the coolant to stabilise.
INSTRUCTIONS FOR STORAGE
If it is stored, the machine must be protected from dust and humidity and put in a covered location,
protected from the adverse weather and the elements in general (avoid very hot locations, locations
exposed to direct sunlight, etc.).
INSTRUCTIONS FOR UNPACKING
After having taken the machine out of the packaging, make sure it is intact, checking for any visibly
damaged parts. Should there be any doubts, do not use the machine and contact professionally
qualified personnel (from your retailer). The packaging elements (plastic, nails, screws, wood, etc.) must
not be left in the reach of children, as they are a source of danger. They must be collected in the
appropriate places, especially if contaminated, until specialised companies dispose of them.
WARNING! Do not throw out the documents with the packaging remnants.
