11
Strap and rear wheel replacement
Tools required: 4mm hex wrench, 5mm hex wrench, 13mm wrench, 10mm wrench and a
Phillips screwdriver.
1.Using a 4mm hex wrench, remove
the four bolts from the rear axle
cover on both sides of the scooter.
(Only for scooters with a cover).
2. Loosen the caliper nut of the
brake cable with a 10mm wrench.
FIG.9
FIG.10
FIG.11
FIG.12
3.Remove the brake arm with a
Phillips screwdriver and 8mm
wrench. Using two 13mm
wrenches, loosen the rear axle
wheel nuts and adjusting washers
and slide the strap out of the rear
wheel pulley. Pull the wheel toward
the rear of the frame.
4.Note the location of all rear wheel
equipment and be sure to reinstall
all items correctly.
Summary of Contents for AIYAPLAY AA1-106V70
Page 37: ...37 ...