The gimbal is clipped onto the CG035 by a simple slide clip on it's belly. Electrically it is
connected with 3 sets of wires plugged into the quad, their use outlined below.
Number 3
supplies power to and
controls the roll remote function of the
gimbal.
Number 2
supplies power to and
controls the pitch remote function of the
gimbal.
Number 1
controls the start/stop video
control as well as taking picture control.
Plugs number 1, 2 and 3 can be
disconnected to disable any all of these
functions.
Additionally as the fpv camera and transmitter has it's own battery and does not draw
power from the quad it can function independently as a fixed FPV camera and transmitter if
so desired.
There is a place to put the FPV antenna
inside either landing strut, but nothing
supplied to attach it with. I use electrical
tape.
