Controller setup:
There are 4 LED’s across the bottom of the controller, these indicate (from left to right) GPS
lock on the drone, GPS lock on the controller, drone out of range, and low battery warning.
Once all lights are
off
this means the internal checks confirm ready to fly status.
Changing mode 1/2
If you want to change from mode two (the default left stick throttle) to mode one (right
stick throttle):
Push both sticks to upper right corners and switch on the controller.
Release sticks.
Led above auto land/take off button should flash.
Move right stick to the right to have right hand throttle (mode 1), or to the left for left hand
throttle (mode 2) Led should now be solid on.
Switch controller off.
To calibrate the controller:
Push both sticks to upper left corners and switch controller on.
The red LED above the auto take off/land button will now flash.
Release both sticks and then press the auto take off/land button once.
Move both sticks to full throw in all directions and allow them to return to centre position.
Press the auto take off/land button once again.
