Using this mode it will hover in place and actively fight wind to maintain a static position.
Used in combination with other functions outlined later.
SWB position 3
Return To Home.
In addition to landing if the RTH is used it flies back to the initial point of takeoff (slowly)
then lands.
SWA:
SWA Position 1
Used for all normal flight modes, effectively this does nothing.
SWA Position 2
Point of interest aka ‘circle mode’.
Used in combination with the gps hold to circle a point of interest (POI).
A somewhat variable experience for most owners, this is usually used in combination with a
camera, it is supposed to find a centre point to circle around until switched to another
mode, with the radius of circle determined by moving the stick assigned to forwards and
backwards to tighten or widen the circle.
SWA Position 3
Headless mode.
Used to ensure that forwards is always forwards, left is always left etc. in relation to the
take off point. Useful if you are new to piloting and wish to get into the air without
performing any manoeuvres like banked turns, whirlpools etc. or if using some camera
techniques, for instance to maintain a moving subject in frame (without a 3d/4d camera
gimbal with full controls, and no you're not going to be getting that on the CG035), while
the quad moves sideways.
