8
|
ANYLOAD OCS Series Electronic Crane Scale User’s Guide
o
The TARE indicator
will light on.
o
The weight reading shall turn to “0” (or “0.0” or “0.00”, depending on
the resolution).
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
o
The scale must be stabled otherwise an error message will
display.
o
Current weight reading must be greater than 0 (or 0.0 or 0.00,
depending on the resolution). Otherwise an error message
will display.
o
Current weight reading must be lesser than 100% scale’s
MAXIMUM
CAPACITY
otherwise an error message will display.
o
The scale must be in gross mode otherwise the action will treat as
TARE OUT.
TARE OUT
Action
o
To
TARE OUT
the tared weight from the scale, press TARE key on
scale or
on remote controller ( the scale shall be in
NET
MODE
).
NOTE:
Setting or changing TARE will not affect the ZERO setting.
NOTE:
Taring will reduce the overloading range of the scale.
For example if a 1000kg container is tared on a 5000kg maximum
capacity scale, the new overload limit will become at 4018kg
[(5000 – 1000) + 9 divisions].
Summary of Contents for OCS Series
Page 2: ......
Page 34: ...33 ANYLOAD OCS Series Electronic Crane Scale User s Guide 10 Notes...
Page 35: ......
