28
|
ANYLOAD OCS Series Electronic Crane Scale User’s Guide
o
To exit
COMMUNICATION SETUP MODE
without saving, press
ON/OFF key on scale or
on remote controller.
To learn how to input values or change the option, refer to User Input section.
Function
o
In
COMMUNICATION SETUP MODE
, user can change the scale’s
serial communication settings to meet the receiver’s requirement,
like communication on/off status, baud rate, scale’s
communication address, signal output mode, etc.
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
COMMUNICATION ON/OFF
o
The scale’s serial communication port is controlled by the
COMMUNICATION ON/OFF
status.
o
When the port is set to on, the scale enables its serial
communication otherwise it is disabled.
o
By default, the
COMMUNICATION ON/OFF
status is set to off
BAUD RATE
o
BAUD RATE
is the speed that scale outputs signal. There are 4 option
baud rates: 1200bps, 2400bps, 4800bps, and 9600bps.
o
By default,
BAUD RATE
is set to 1200bps.
Summary of Contents for OCS Series
Page 2: ......
Page 34: ...33 ANYLOAD OCS Series Electronic Crane Scale User s Guide 10 Notes...
Page 35: ......
