25
|
ANYLOAD OCS Series Electronic Crane Scale User’s Guide
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
RESOLUTION
o
Technically, the
RESOLUTION
here and the above-mentioned
RESOLUTION SWITCH
are both refer to the same thing. The only
difference is that changes made here will be saved permanently while
changes at
RESOLUTION SWITCH
work temporarily and will return to
its default measurement unit once the scale is rebooted.
To learn more about Resolution, refer to Resolution Switch in Advanced
Operations
section.
AUTO POWER-OFF TIMING
o
AUTO POWER‐OFF
function extends the battery’s charge and turns off
the scale if it is not working or has no activity on specified time set.
o
AUTO POWER‐OFF
will start the scale’s
POWER‐OFF
countdown
timer when there’s no activity or the load is stable. Once the timer’s
timing reaches the delay set in
SYSTEM SETUP
, it will automatically
turn off the scale. Pressing any keys or disturbing the load will reset
the countdown timer.
o
Scale can be timed to auto power‐off from “01” minutes to “99”
minutes or “never”. When
AUTO POWER‐OFF TIMING
is set to “00”
the scale is set to “never” meaning auto-off is disabled.
o
The default
AUTO POWER‐OFF TIMING
is set to “15” minutes.
Summary of Contents for OCS Series
Page 2: ......
Page 34: ...33 ANYLOAD OCS Series Electronic Crane Scale User s Guide 10 Notes...
Page 35: ......
