24
|
ANYLOAD OCS Series Electronic Crane Scale User’s Guide
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
SYSTEM SETUP
Action
o
To enter
SYSTEM SETUP MODE
, press 2ND and then HOLD keys on
scale or
and then
on remote controller.
Some models do
not have HOLD key at the scale, so it is recommended to have the
remote controller.
o
To input values, press ZERO and TARE keys on scale or
and
on remote controller.
o
To confirm inputted value, press HOLD key on scale or
on remote
controller.
o
To save and exit
SYSTEM SETUP MODE
, press 2ND key on scale
or
on remote controller.
o
To exit
SYSTEM SETUP MODE
without saving, press ON/OFF key
on scale or
on remote controller.
To learn how to input digits or change the option, please refer to User Input
section.
Function
o
In
SYSTEM SETUP MODE
, user can change the scale’s system function
to their desired setting like higher resolution, automatic power‐off
delay, idle delay, the screen’s brightness, display frequency, anti-motion
level, etc.
o
The screen will display the welcome message shown below:
Summary of Contents for OCS Series
Page 2: ......
Page 34: ...33 ANYLOAD OCS Series Electronic Crane Scale User s Guide 10 Notes...
Page 35: ......
