20
|
ANYLOAD OCS Series Electronic Crane Scale User’s Guide
The lb indicator will light on after
DISPLAY UNIT
switches to lb.
The kg indicator w i l l light on after
DISPLAY UNIT
switches to kg.
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
o
The scale must be in
GROSS MODE
otherwise an error message
will display.
o
Refer to System Unit under Scale’s Configuration in Advanced
Operations section of
Technical Manual for more information about
scale’s measurement system.
o
Refer to User‐defined Unit of Scale’s Configuration in Advanced
Operations section of
Technical Manual for more information about
user‐defined unit.
NOTE:
DISPLAY UNIT SWITCH functions only to change the unit in the display temporarily.
It will return to its default SYSYTEM UNIT set during calibration. In changing the
SYSTEM unit, recalibration of the scale is required. Refer more to Technical
Manual in changing SYSTEM UNIT and recalibration.
NOTE:
Some models are equipped with only one indicator either a lb indicator or a kg
indicator is available. If lb indicator is only available, this lb indicator will light off
when the scale is switch to its alternate unit like kg or User’s unit. The same
function for scale with kg indicator is only available, the kg indicator will light off
when switch to its alternate unit.
Summary of Contents for OCS Series
Page 2: ......
Page 34: ...33 ANYLOAD OCS Series Electronic Crane Scale User s Guide 10 Notes...
Page 35: ......
