17
|
ANYLOAD OCS Series Electronic Crane Scale User’s Guide
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
o
The scale must be stabled otherwise an error message will
display.
o
Current weight reading must be greater than 0 (or 0.0 or 0.00,
depending on the resolution) otherwise an error message
will display.
o
The weight reading on scale must return to 0 (or 0.0 or 0.00,
depending on the resolution) before the next weight reading can be
added. This assures that a load on the scale is only added to the
TOTAL
once otherwise an error message will display.
VIEW TOTAL
Action
o
To view the
TOTAL
in scale, press
on remote controller.
Function
o
The scale will switch into
VIEW TOTAL MODE
.
o
The screen flashes current
TOTAL
, for example 3205kg.
Condition
o
The scale must not in
HOLD
mode otherwise an error message
will display.
o
The
TOTAL
must be greater than 0 (or 0.0 or 0.00, depending on the
resolution) otherwise an error message will display.
NOTE:
The accumulator always uses the displayed weight, so GROSS and
NET readings can be added into the same TOTAL.
Summary of Contents for OCS Series
Page 2: ......
Page 34: ...33 ANYLOAD OCS Series Electronic Crane Scale User s Guide 10 Notes...
Page 35: ......
