About the Module
9
Doc.Id. SCM-1200-121
Anybus Communicator CAN to CANopen
Doc.Rev. 1.00
2.2 Mounting
Perform the following steps when physically installing the Communicator:
1.
Snap the Communicator on to the DIN-rail (See “External view” on page 8)
The DIN-rail mechanism works as follows:
To snap the Communicator
on
, first press it downwards (1) to compress
the spring in the DIN-rail mechanism, then push it against the DIN-rail
as to make it snap on (2)
To snap the Communicator
off
, push it downwards (1) and pull it out from
the DIN-rail (2), as to make it snap off from the DIN-rail.
2.
Connect the Communicator to the CAN network
3.
Connect the Communicator to the CANopen network.
4.
Set the CANopen configuration switches
5.
Connect the power cable and apply power
1
2
1
2
