manualshive.com logo in svg

Anybus Communicator - CANopen, User Manual

Share
Download
Anybus Communicator - CANopen User Manual Download Page 13

Doc.Id. SCM-1200-121

Anybus Communicator CAN to CANopen
Doc.Rev. 1.00

Chapter 2

2. About the Module

2.1 External view

A: Status LEDs

See also...

- “Status LEDs” on page 10

B: Fieldbus Specific Connectors and Switches

This connector (connectors) and, if available, 
these switches are used to connect the Anybus 
Communicator CAN module to the CANopen 
network. They are described in “CANopen 
Connector and Switches” on page 11.

C: USB connector

This connector is used for uploading and down-
loading the configuration and for software up-
grade of the module.
See also...

- “USB Connector” on page 12

D: CAN Connector

This connector is used to connect the commu-
nicator to the CAN network.
See also...

- “CAN Connector” on page 12

E: Power Connector

This connector is used to apply power to the communicator.
See also...

- “Power Connector” on page 12

F: DIN-rail Connector

The DIN-rail mechanism connects the communicator to PE (Protective Earth).
See also...

- “Mounting” on page 9

A

B

C

D

E

F

Summary of Contents for Communicator - CANopen



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands