manualshive.com logo in svg

Anybus Communicator - CANopen, User Manual

Share
Download
Anybus Communicator - CANopen User Manual Download Page 31

Anybus Configuration Manager   

26

Doc.Id. SCM-1200-121

Anybus Communicator CAN to CANopen
Doc.Rev. 1.00

Online

This menu features the following entries:

• Select Connection

This entry gives the opportunity to select con-
nection for the module.
See also

-  “Select Connection” on page 40

• Connect/Disconnect

This entry connects/disconnects the configuration tool to the 
module.

 

• Upload Configuration

This entry uploads a previously downloaded configuration to 
the Anybus Configuration Manager.

• Download Configuration

This entry downloads the configuration to the Anybus Commu-
nicator CAN. Any previously downloaded configuration will be 
overwritten.

• Set Module Password

This option makes it possible to create, change and 
remove password for a module.
See also

-  “Set Module Password” on page 41

Help

This menu features the following entry:

• About...

Displays information about the Anybus Configuration Manager.

Summary of Contents for Communicator - CANopen



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands