Anton Paar 84138, Instruction Manual

Page: 65 / 162

C96IB01 65
EN
13 Error Messages and Warnings
Error message Cause
Out of Specification The measured sample temperature is outside the
specifications.
Out of Range The measured value is outside the specified range.
Possible reasons:
•
The temperature is too high or too low.
• The density is too high or too low.
• The measured value is invalid.
Temperature Range The temperature of the reference liquid for
readjustment is outside the temperature
specifications (+15 to +25 °C).
Density Range The density of deionized water at 20 °C measured
during readjustment is outside the allowed limits
(tolerance 0.01 g/cm
3 ).
Criterion The density of deionized water at 20 °C measured
during readjustment deviates from factory
adjustment by more than 0.01 g/cm
3
.
Low Battery The battery is almost empty.
Battery Empty The battery is empty.
Error 01 The temperature is invalid.
Error 02 The period is invalid.
Error 03 DMA 35 has no adjustment data.
Error 04 Calculation error.
NOTICE If the error messages "Error 01" to "Error 04" occur, send in your
instrument for service.