
4
www.antiktech.com
EX-5108
Series
8-Way H.264 HD/SD Encoder
1 Overview
EX-5108 is a series of high density real-time H.264 HD/SD Encoders that can support up to eight High
Definition (HD) A/V signals compressing and encoding simultaneously. These A/V signals can be fed into
the device via 8x HDMI or 8x SDI input ports as different factory options. The encoded streams can be
then remultiplexed and output over its GbE IP and ASI ports. All models support Time Base Correction
(TBC) to ensure the audio and video synchronization, the features necessary for the professional TV
signal flow. The series provide two TS/IP operation modes. The first is “Full Duplex”, which allows one
MPTS or SPTS inputted over 1 multicast/unicast to make up a new MPTS with local encoders, then
sends out the new
one over 1 multicast/unicast. In the second mode “Multiple output” which delivers up
to 9 streams over IP. There are 8 un-stuffed SPTS (lower bit rate but less PCR accurate than normal
SPTS, from local encoders) and 1 MPTS (from internal reMultiplexer) over the IP with different Unicast or
Multicast IP addresses. EX-5108 allows user to configure, monitoring and manage over the informative
front panel and keypad, or Web interface, or SNMP based management software from 3rd party. This
Encoder family presents brilliant picture quality, high density design, high stability system architecture,
and the hot-swappable power supply.
2 Features
Compile with H.264/AVC [email protected]
MPEG1 Layer II, MPEG2 AAC-LC, MPEG4 AAC-LC audio compression (see ordering information)
8-way real time encoder with re-multiplexed integrated
Built-in re-Mux accepts up to 10 SPTS/MPTS (8 from local encoders, 2 from external input over IP and
ASI)
1 ASI input (for daisy chain) & Redundant ASI output
Full duplex Gigabit TS over IP I/O (under Full duplex operation mode)
Up to 9 multicast/unicast output (under Multiple-channle operation mode)
VBR and CBR encoding mode
Free resolution downscale at same frame rate
SNMP & HTTP WEB
Redundant Power Supplies
19” x 1 U EIA standard chassis