25
www.antiktech.com
Local Settings
Set the parameters for the TS/IP output port.
Gigabit Address:
set the IP address of the IP port
Gigabit Subnet Mask:
set the net mask of the IP port
Gigabit MAC Address:
display the MAC address of the IP port, cannot be modified by user
Gigabit Gateway:
set the gateway address under which the IP port is connected
Gateway MAC Address:
set the MAC address of the gateway under which the device is connected, this is
necessary when the IP streaming is needed to pass through the gateways
8.4 MUX
The device supports remux the 8 SPTS generated locally with the service(s) carried by the transport stream
inputted via ASI In or TS/IP In (available only under full duplex mode).
The “Output Bit Rate” is the bit rate of the remux output, the value has to be equal or greater than the total bit
rate of the selected services.