17
www.antiktech.com
Gigabit Input
TS Clock Recovery:
Auto:
it is suggested to set Auto when there is
accurate PCR carried by the inputted TS/IP
Fixed Rate:
when fixed rate is selected, user has to
configure a bit rate to regenerate the TS clock. The
configured fixed bit rate has to be a little bit higher
than the bit rate of the inputted TS/IP.
TS Clock Recovery: Auto
7.3 System
System
Network Setting
IP Address:
set the IP address of the device, valid
range from 0.0.0.0~255.255.255.255
IP Address: 10.10.70.48
Subnet Mask:
set the net mask of the device, valid
range from 0.0.0.0~ 255.255.255.255
Net Mask: 255.255.255.0
Gateway:
set the gateway of the device, valid range
from 0.0.0.0~255.255.255.255
Gateway: 10.10.70.1
MAC Address:
to display the MAC address
Remote Setting
Trap IP Address:
set the IP address of the SNMP
Trap server, valid range from
0.0.0.0~255.255.255.255
Trap IP Address:
10.10.70.25
Device Label
Device Label:
user allows to rename the device,
press Enter and key in the name of the device, then
press Enter to confirm the setting or press Exit to
cancel.
Software Version
Software Version:
display the software version
Factory Default
Factory Default:
Enter = Yes:
press Enter to recall the factory default
settings.
Exit = No:
press Exit to cancel
Note: the IP address of
the device is not reset to
the factory setting!
Machine Type
MAC Address:
to Modify the MAC address
S/N:
display the serial number of the device
Gigabit MAC Address:
to Modify the Gigabit MAC
address
Detail Version:
Display the detail version of
MCU,FPGA,LINUX OS
WEB Login ID
Edit Login ID:
press Enter and key in the login ID
for WEB management
Default Login ID: root
WEB Login Password
Edit Login Password:
press Enter and key in the
password for WEB management
Default Login Password:
12345
