27
www.antiktech.com
8.5 System
The system page gives all information of this device including device name, serial number, software version,
and so on. User can implement the alarm switch configuration, network settings, TS/IP operation mode and
software upgrade under system page.
Device
Device Label:
Check the name and the serial number of this device. User can resign this product name at will,
the device name should be less than 24 characters. The serial number is read-only.
Serial Number:
show the serial number for the device, cannot be modified by user.
WEB Auto Refresh Time:
set the interval of webpage refresh.
Gigabit Mode:
switch the TS/IP operation mode between “Multiple Output” and “Full duplex”. The device will
reboot after change.
IP Control
The network settings for the device can be found and configured under the page below.