CHAPTER 2 DECADE II DCC upgrade kit install guide, edition 5
15
3. Installation of 2
nd
internal cell cable
If the DECADE II has a s/n < 17100072 (upgrade kit p/n 171.0220) it is
necessary to install the internal cell cable now. Please continue with
the installation procedure described in appendix A.
For an upgrade of a DECADE II with s/n > 17100072 (upgrade kits p/n
171.0216 & 171.0218) this procedure can be skipped. Please continue with
the next installation step, the labelling of cables for identification.
4. Identification of cables (labels)
On the sensor board the following parts can be identified (see figure 4):
A. Sensor board boot-EPROM
B. Internal cell cable
C. I
2
C/power cable
B
C
A
Figure 4 Top view sensor board. (A) sensor board EPROM, (B): internal cell
cable connector and (C): I
2
C/power cable connector.
Summary of Contents for DECADE II
