Antec Leyden DECADE II, Manual

Page: 22 / 42

20 Installation guide
7. Reconfiguration of connector 7 (heater)
This installation step can be skipped for upgrade kit with p/n 171.0216
(DECADE II with s/n > 17100091)
In order to be able to drive the oven with the updated analog heater control it
is necessary to rewire connector 7 on the control board. See figure 9. To
remove connector 7 from the control board use a flat screw driver to release
the connector from the socket. Insert the screw driver between the connector
and the retaining clip on the socket. Push the retaining clip aside by means of
a screw driver and firmly pull the connector from the socket.
The connector is fixed tightly in the socket and considerable force has
to be used to remove it. To avoid damage of the control board PCB
prevent it from bending by holding it in place with your hands.
Figure 9 Connector 7 on the DECADE II control board (conventional wiring).