Antec Leyden DECADE II, Manual

Page: 18 / 42

16 Installation guide
Both the internal cell cable and the I
2
C/power cable of sensor board 1 should
be labelled for identification using the vinyl label marked "sensor 1" provided
in the kit. The labels can be found in the white envelope (p/n 171.0208).
Label the cables as depicted in figure 5. Place label at the end of the cable
next to the connectors which are mounted on sensor board 1.
Figure 5 Labelling of cables sensor board 1.
Label the internal cell cable of sensor board 2 with a vinyl label marked
"Sensor 2". The internal cell cable for sensor board 2 is not connected to any
board and is fixed in the black cable clamp mounted to the top cover inside
the housing.