9
please put the nozzle back on the outlet and make sure it is properly installed.
DMX Connector Pin Assignment
The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below indicate pin
assignment information
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
DMX Control Operation
HZ-500 has on-board DMX control and the addressing is via the LCD control panel. The
HZ-500 uses 1 channel to control on/off operation. The channel has a value range from 0 to 255. The
on/off function can also be programmed with a DMX controller or DMX control software used by lighting
and effects operator.
Channel A
251-255 = ON
0-250 = OFF
