APPENDIX: Wall-mount and Chassis Installation
This part describes how to install your VDSL2 Bridge and make connections to it.
Please read the following topics and perform the procedures in the order being presented.
Wall-mount Installation
Step 1: Please find the wall that can mount the EVC-3101
Step 2: Screw two screws on the wall.
Step 3: Hang the EVC-3101 on the screws from the wall.
Step 4:
Refer to chapter 3.3 Power Information for power supply to the EVC-3101.
Before mounting the device to the wall, please check the location of the electrical outlet and
the length of the Ethernet cable.