background image

1. 

PACKAGE CONTENTS ................................................................................................................. 5 

2. 

PRODUCT FEATURES .................................................................................................................. 6 

3. 

HARDWARE INTRODUCTION ..................................................................................................... 7 

3.1. 

Front Panel and LED Indicators .................................................................................... 7 

3.2. 

Rear Panel and Mode DIP Switch ................................................................................. 8 

3.3. 

Power Information .................................................................................................... 10 

4. 

CONNECTING AND USING THE EVC-3101 ................................................................................ 11 

4.1 

Point-to-Point Application -- LAN to LAN Connection ................................................ 12 

5. 

PRODUCT SPECIFICATIONS ...................................................................................................... 13 

6. 

PERFORMANCE TABLE ............................................................................................................. 15 

7. 

Troubleshooting ...................................................................................................................... 16 

8. 

FAQs........................................................................................................................................ 17 

9. 

CUSTOMER SUPPORT .............................................................................................................. 18

 

Summary of Contents for EVC-3101





















Reviews: