EN
98
TIMER mode
Press the TIMER ON button to activate the setting of
start delay. Press the TIMER OFF button to activate
the setting of stop delay.
Setting the start delay
1.
Press TIMER ON. The display on the remote
control shows TIMER ON, the last set start
delay, and the status in h.
2.
Press the TIMER ON button once to set the
required start delay. Each time you press
the button the setting increases in steps
of 0.5 hours up to 10 hours and steps of 1
hour from 10 to 24 hours.
3.
When the time for TIMER ON is set a signal
is sent to the appliance 0.5 seconds. After
another 2 seconds the h status disappears
and the set point temperature is shown
again on the display.
Setting the stop delay
1.
Press TIMER OFF. The display on the
remote control shows TIMER OFF, the last
set stop delay and the status in h.
2.
Press the TIMER OFF button once to set the
required stop delay. Each time you press
the button the setting increases in steps
of 0.5 hours up to 10 hours and steps of 1
hour from 10 to 24 hours.
3.
When the time for TIMER OFF is set a
signal is sent to the appliance after 0.5
seconds. After another 2 seconds the
h status disappears and the set point
temperature is shown again on the
display.
IMPORTANT:
Only the following times can be set.
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5,
6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21, 22, 23 and 24.
