EN
105
INSTALLATION OF OUTLET HOSE
The outlet hose and adapter should be fitted, if
necessary for the mode in use.
COOL, HEAT (heat pump) or
AUTO
Installed
FAN, DEHUMIDIFY or
HEAT(electric heater)
Not installed
1.
Fit adapter B and adapter I on the outlet
hose (fig. 16a or 16b). Fit the window
insert according to the instructions above.
2.
Hook the outlet hose connection in the
fastener on the air outlet and move down
in the direction of the arrow (fig. 17).
THE OUTLET HOSE CAN BE LED THROUGH A WALL
(does not apply for appliances without adapter A,
expander plug and wood screws as accessories).
1.
Make a hole in the wall. Fit the outlet
adapter A on the outside of the wall
with 4 expander plugs and wood screws
(fig. 18). Screw tight.
2.
Connect the outlet hose to outlet
adapter A.
NOTE:
• Fit the adapter cover over the hole when the
appliance is not in use.
• The outlet hose can be routed to a suitable
length for the installation, but should be as
short as possible.
IMPORTANT:
• Do not bend the outlet hose too sharply (fig.
19).
• Check that there are no obstacles within 50
cm of the air outlet, otherwise the outlet
system will not work properly
Fig. 16a
Fig. 16b
Fastener
Connection
Positioning of
expander plug
Adapter A
Adapter cover
Max. 120 cm
Min. 30 cm
Fig. 17
Fig. 18
Fig. 19
