EN
103
INSTALLATION IN SASH WINDOW THAT OPENS VERTICALLY (OPTION)
1.
Cut the self-adhesive foam rubber seal to a
suitable length and fasten it to the bottom
window frame (fig. 8).
2.
Align the window insert to the bottom
window frame. Adjust the length of the
window insert to the window. Cut the
window insert if the width of the window
is less than 67 cm.
3.
Open the window and put the window
insert on the bottom window frame (fig.
9).
4.
Cut the self-adhesive foam rubber seal to
a suitable length and fasten it to the top
edge of the window insert (fig. 10).
5.
Close the window so that it presses firmly
against the window insert.
6.
Cut the foam rubber seal to a suitable
length and seal the gap between the
window halves (fig. 11
Foam rubber seal A
(self-adhesive)
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Window
insert
Bottom window
frame
67–122 cm
Window
insert
Bottom window
frame
Foam rubber seal
