EN
104
INSTALLATION IN SASH WINDOW THAT OPENS HORIZONTALLY (OPTION)
1.
Cut the self-adhesive foam rubber seal to a
suitable length and fasten it to the window
frame (fig. 12).
2.
Align the window insert to the window
frame. Adjust the length of the window
insert to the window. Cut the window
insert if the height of the window is less
than 67 cm.
3.
Open the window and put the window
insert on the window frame (fig. 13).
4.
Cut the self-adhesive foam rubber seal to a
suitable length and fasten it to the edge of
the window insert (fig. 14).
5.
Close the window so that it presses firmly
against the window insert.
6.
Cut the foam rubber seal to a suitable
length and seal the gap between the
window halves (fig. 15).
Foam rubber seal A
(self-adhesive)
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Window
insert
67–122 cm
Foam rubber seal
