EN
92
FUNCTIONS
1.
Operating modes: AUTO, COOL, DRY, HEAT modes (not on models that only have cooling) and FAN.
2.
24 hour timer
3.
Adjustable range for room temperature: 17 to 30°C and 62 to 88°F
4.
LCD
NOTE:
The diagrams in these instructions are only intended as illustrations. The appliance may deviate from
the diagrams in these instructions.
BUTTONS
1. TEMP DOWN
Reduces the set point temperature in steps of 1°C
down to 17 °C, or in steps of 1°F down to 62°F.
2. TEMP UP
Increases the set point temperature in steps of 1°C
up to 30 °C, or in steps of 1°F up to 88°F.
3. MODE
Switches between modes in the following order.
NOTE:
HEAT mode is only available on models with
both heating and cooling.
4. SWING (some models)
Starts and stops the air deflector to adjust the
required direction of the air.
5. RESET
Resets the remote control to default. All the settings
made are lost.
6. ON/OFF
Switches the appliance on and off.
7. FAN SPEED
Switches between speed settings as follows. Some
models do not have MED FAN mode.
8. TIMER ON
Press to activate the setting of start delay. Each
time you press the button the setting increases in
steps of 0.5 hours up to 10 hours and steps of 1
hour from 10 to 24 hours. Cancel this function by
setting the time to 0.0.
9. ECONOMY (SLEEP)
This function produces a comfortable temperature
and saves energy when you are sleeping. The
function can only be used in COOL, HEAT and AUTO
mode.
Model RG51B14/(C)E, RG51B16/(C)E, RG51B18/(C)
E, RG51B19/(C)E-M, RG51B20/(C)E, RG51B31/(C)E,
RG51B30/(C)E.
NOTE:
• Models RG51B16/(C)E, RG51B18/(C)E do not
have the SWING function.
• Models RG51B18/(C)E, RG51B19/(C)E-M,
RG51B20/(C)E do not have the LED DISPLAY
button.
• Model RG51B19/(C)E-M does not have the
MED FAN function.
• Model RG51B31/(C)E has the ECONO¬MY
button instead of the SLEEP button.
• Model RG51B30/(C)E does not have the MED
FAN and SWING functions.
