EN
93
NOTE:
If the appliance is in SLEEP mode this is
interrupted if the ON/OFF, FAN SPEED, SLEEP or
MODE button is pressed.
10. TIMER OFF
Press to activate the setting of stop delay. Each time
you press the button the setting increases in steps
of 0.5 hours up to 10 hours and steps of 1 hour
from 10 to 24 hours. Cancel this function by setting
the time to 0.0.
11. LOCK
Press this depressed button to lock the actual
settings. The remote control does not respond to
pressing any other buttons than LOCK. This function
is used to prevent unintentional changes. Press the
button again to deactivate the function. When the
function is activated a lock symbol is shown on the
display on the remote control.
12. LED DISPLAY
Press this button to clear the display on the
appliance. Press again to activate the display NOTE:
Models RG51B18/(C)E, RG51B19/(C)E-M, RG51B20/
(C)E do not have the LED DISPLAY button.
13. FOLLOW ME/TEMP SENSING
• Press this button to activate the FOLLOW ME
function.
• The display on the remote control shows the
actual temperature at the remote control
when the Follow Me function is activated. The
remote control sends a temperature signal to
the appliance at 3 minute intervals until the
Follow Me button is pressed again.
• The Follow Me function cannot be used in DRY
and FAN mode.
• The function is deactivated if the appliance is
switched off and switched on.
14. ION
Press this button to activate the ionisation unit,
which helps to remove pollen and impurities from
the air.
• Model RG51B25/(C)E, RG51 B27/(C)E.
NOTE:
Model RG51B25/(C)E does not have the
SWING function.
• Model RG51B17/(C)EU
