Anritsu VectorStar ME7838 Series, Maintenance Manual

Page: 13 / 178

General Information 1-6 ME7838 Series VNA System Overview
VectorStar ME7838 Series MM PN: 10410-00306 Rev. F 1-5
ME7838A Standard Broadband VNA System Components
–
MS4647A Based
Table 1-1. ME7838A Standard Broadband VNA System Components – MS4647A Based
Part Number Name Specifications
Standard ME7838A Configuration
MS4647A VectorStar MS4647A Vector Network Analyzer
(VNA) 10 MHz to 70 GHz
V (m) Test Ports
MS4640A-002 Time Domain Option
MS4640A-007 Receiver Offset Option
MS4640A-070 70 kHz Low End Frequency Extension
Coverage Adds VNA low frequency coverage from 70
kHz to 10 MHz
MS4647A-08X Millimeter-Wave Interface Option Select one:
• Use Option MS4647A-080 if VNA Option
051, 061, or 062 is not selected below.
• Use Option MS4647A-081 if VNA Option
051, 061, or 062 is selected below.
3739A or 3739B Broadband Test Set With front and rear panel interface cables
3743A Millimeter-Wave Modules 70 GHz to 110+ GHz
2 each
Coaxial Cable Option – Select One (1)
806-206-R 1.85 mm Interconnect Cable 70 cm (24 inches)
V (m) to V (f), 2 cables
806-209-R 1.85 mm Interconnect Cable 91.5 cm (36 inches)
V (m) to V (f), 2 cables
806-396-R 1.85 mm Phase Stable Interconnect Cable 91.5 cm (36 inches)
V (m) to V (f), 2 cables
MS4647A VNA Front Panel Options – Select None or One (1)
MS4647A-051 Front Panel Loops 6 Front Panel Loops
• Provides front panel loops for b1, a1,
Port 1 Source, Port 2 Source, a2, and b2
• If Option 051 is selected, use Option
MS4647A-081 above.
MS4647A-061 Active Measurement Suite 2 Attenuators
• Includes front panel loops above with
two (2) attenuators, bias tees in test set,
gain compression, and efficiency
measurement software.
• If Option 061 is selected, use Option
MS4647A-081 above.
MS4647A-062 Active Measurement Suite 4 Attenuators
• Includes front panel loops above with
four (4) attenuators, bias tees in test set,
gain compression, and efficiency
measurement software.
• If Option 062 is selected, use Option
MS4647A-081 above.