Anova TC98L, Instruction And User'S Manual

Page: 11 / 40

EN
11
4.2. Steering wheel assembly
Place the machine on a flat surface and straighten the front wheels.
Mount the axle to the outgoing axle with the bolt and nut.
Place the steering wheel on the steering linkage shaft with the spokes facing
the seat.
4.3. Seat mounting
Mount the seat on the plate with the screws.
4.4. Battery connection
1) Put the battery in its housing.
Important
Place the battery with the (+) and (-) polarities
2) Connect the battery connectors to the connection
cables of the machine and tighten the 2 screws.
Then cover the protective cap so that the 2 cables
are in place
3) Secure the battery with the small rubber strap.
Note: This machine uses the battery: 12V, 18Ah.
4.5. Deck Wheel Mount
Mount the double deck wheel to the deck using the bolts, bushings, washers
and nuts.
# The electrolytic fluid is a sulfuric acid solution.
Danger
Sulfuric acid is corrosive and dangerous.
Sulfuric acid can cause blindness or severe burns.
Keep out of reach of children.
Never dispose of the battery in the environment. If the battery needs to be replaced,
follow the disposal procedures established by local authorities.