Anova TC98L, Instruction And User'S Manual

Page: 14 / 40

EN
14
G. Cutting height adjustment lever
Raises or lowers the blade deck and thereby adjusts the height of
grass cutting.
There are seven positions for this lever (shown as "1" to "7" on the label),
corresponding to various heights between 30 and 90mm.
To move from one height to another, press the button on the handle and guide
the lever to the required position. When the button is released, the lever
remains in the selected position.
H. Blade rotation activation lever
Starts or stops the rotation of the blade.
hooked blade
blade disengaged
I. Driving pedals
This pedal engages the wheel drive and also modulates the forward and reverse speeds of the
machine.
- To activate the drive, press it towards «F» with the toe.
As the pressure on the pedal increases, the speed of the
machine increases.
- Reverse gear is activated by pressing the pedal with the
heel towards «R».
- The pedal automatically goes to neutral «N» when it is
released.
Caveat
Reverse should only be engaged when the machine is stopped.
Note: Remember to release the parking brake
J. Lever to activate the hydrostatic transmission
This lever has two positions as shown on the label:
- «A» Transmission activated: for all uses, during movement and
during cutting.
- "B" Transmission Disconnected - This makes it much easier to
move the machine by hand, with the engine off.
Important
To avoid damage to the transmission unit, this operation must be carried out only with the
engine stopped.