Anova TC98L, Instruction And User'S Manual

Page: 10 / 40

EN
10
4. UNPACKING AND ASSEMBLY
For storage and transportation purposes, some machine components are not factory installed
and must be assembled after unpacking. Follow the instructions below.
Important
The machine is supplied without engine oil and fuel. Before starting the engine, fill with oil and
fuel following the instructions given in the engine manual.
4.1. Unpacking
When unpacking the machine, take care to gather all individual parts and accessories and do
not damage the mower deck when removing the machine.
First remove the 6 bolts at the bottom of the packing shelf, then you can lift the top frame to
release the machine (two person operation).
Cut the fixed cable at the front and rear of the mower frame, then remove the mower from the
pallet.
The packaging contains:
1. Machine
2. steering wheel
3. Steering connecting shaft
4. Steer shaft cap
5. Wheels
6. Bumper
7. Instruction Manual
8. Nuts, bolts, washers, bushing and starter key
9. Tools
10. seat
Note: To avoid damage to the mower deck, raise the mower deck to its full height and use extreme
care when removing the machine from the pallet.
1
2 3 4
5
6
7
9
10
8