annke SANNCE N43SU, Quick Start Manual, Page: 21 / 32

16
“ Enable ”, select “ Channel ”, “ Sensitivity ”, “ Period ”, “ Alarm Out ”, “ Record Channel ”, “ Buzzer ”, “ Send
Email ” according to you needs, and then click “ OK ” to save, as shown in the figure below.
When the equipment can not get the channel video signal, the video loss alarm and the linkage function will be
turned on.
3.9.4 Abnormality
Steps:
1. Go to NVR’s “ Main Menu ”>“ Record ”>“ Record Configuration ” to tick “ Alarm ”.
2. Go to NVR’s “ Main Menu ”>“ Alarm ”>“ Abnormality ” to go to the interface of Abnormality. Click and select
“ Event Type ”(No Storage/Storage Device Error/Storage No Device/Net Disconnection/IP Conflict can be
selected), “ Enable ”, “ Show Message ”, “ Buzzer ”, “ Mobile Reported ”, “ Send Email ” according to you needs,
and then click “ OK ” to save, as shown in the figure below.
Analyzing and inspecting current software and hardware of the device: When some abnormal events happen, the
device will make a relative answer such as show message and buzzer.
3.10 Email Setting
Steps:
1.
Make sure your NVR has connected to the router and Internet successfully. You can go to NVR’s “ Main