annke SANNCE N43SU, Quick Start Manual, Page: 12 / 32

7
You can enter “ Guide ” , and click “ Next ” to the next step, and then click “ Next ” again go to this interface. When
you connect the NVR to router by using an Ethernet Cable, if there is “Test Gateway.......ERR” shows up, click
“ Retry ” make it turns to “Test Gateway......OK”. Make sure “Test Gateway”, “Test network”, “Test DNS” are
“OK”, which means your device has been connected to the network properly, and then you can view all cameras
image remotely on the computer and mobile phone.
3.3.4 Install Mobile App and Add Device
1. Install Mobile App
You can enter “ Guide ” to go to this interface. Scan the QR code of “ APP ” below to download mobile app from
App Store or Google Play.
2. Add Device
Scan the QR code of “Serial No” below to add your device by the “ XMEye ” app on your mobile phone.
3.4 Network Setting
Go to NVR’s “ Main Menu ”>“ System ”>“ Network ”, click and check “ DHCP Enable ”, and then you will get an
IP Address as shown in the figure below.
*
Notes
: Make sure you have a router and high-speed network connection. Connect your NVR to the router by
using the Ethernet cable. Make sure your network speed come up to 1Mbps at least in order to get the best video